172-PIECE. TOOL TROLLEY WITH TOOLS "NEW GEN" BLACK-GREEN. PERFOSE WALLS JBM

7-drawer "New Gen" tool trolley with tools. The corners of the trolley are covered with impact-resistant additional plastics. The tools are located in soft "foam" panels. The foam is covered with a washable plastic layer (carbon pattern). Each tool has a printed measurement. The five lower drawers have dimensions of 575x420x75 mm and the two higher ones 575x428x150 mm. The drawers are centrally lockable. The trolley locks on the side, which does not interfere with the use of the drawers. The drawers of the tool trolley are located on roller bearings. The trolley has wheels on bearings. 2 of which have brakes and swivel. The top of the cabinet is covered with a plastic cover. in which there are recesses for cans and accessories. The narrower sides of the cabinet are perforated. If necessary, tool holders can be added. The trolleys load capacity is 55 kg. The trolley is 960 mm high. Width 775 mm. depth 466 mm. Weight 64 kg.

NB! The trolley is delivered fully assembled - remove the cardboard covers and it is ready for use immediately!

The set includes:

• 1/4” chuck. short 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 mm
  
• 1/4" chuck. long 6-7-8-9-10-11-12-13 mm
• 1/4" Torx chuck E4-E5-E6-E7-E8
• 1/4" flat chuck bit 4-5.5-6.5 mm
• 1/4" cross chuck bit PH1-PH2-PZ1-PZ2
• 1/4" hexagon socket head 3-4-5-6 mm
• 1/4" Torx socket head T8-T10-T15-T20-T25-T27-T30
• 1/4” socket wrench. with offset. 72 teeth. chuck lock
  
• 1/4” extension shank 50-100 mm
  
• 1/4” T-handle
  
• 1/4” screwdriver handle
  
• 1/4” gimbal
  
• cross bit PH3-PH4-PZ3-PZ4
• flat bit SL8-SL10-SL12 mm
• hex socket 7-8-10-12-14 mm
• Torx socket T40-T45-T50-T55-T60
• 1/2" chuck for turning bits
• 1/2” chuck. short 10-11-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32 mm
  
• 1/2" socket. long 14-15-17-19-22 mm
• 1/2" spark plug socket 16-21 mm
• 1/2” extension arm 125-250 mm
  
• 1/2” T-handle adapter
  
• 1/2” cardan
  
• 1/2” wrench. with offset. 72 teeth. chuck key
• ring-ring key with offset 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm
  
• leaf-ring key. with bend 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-21-22-24 mm
  
• screwdriver flat SL 6x38-3x100-5x75-6x100-8x150-10x200 mm
  
• screwdriver cross PH PH2x38-PH0x75-PH1x100-PH2x100-PH3X150-PH4X200 mm
  
• mini L-hexagon. 5-piece
• L-hexagon. longer ball point 9-piece
  
• L-Torx. 9-piece
• hawk bits. with locking button 250 mm
  
• cutting pliers 150 mm
  
• pointed nose pliers 200 mm
  
• clamping ring pliers internal-external and straight
  
• locking tinsmith pliers 250 mm
• tape measure 3 m
• plastic hammer 340 mm with wooden handle
  
• ball-end hammer with fiber handle 310 mm