great selection of tool trolleys from SONIC. The trolley has 8 drawers (1 deep). which can be locked with a key. The height of the trolley is 103 cm, ensuring that you can use the work surface without bending over. The trolleys construction is durable and, thanks to the well-designed side panels, the trolley does not damage the objects around it. A can and paper roll holder is included as an accessory. Rubber-coated wheels Ø 125 mm. two of which are swivel and lockable. Height is 1032 mm. Depth 520 mm. width 830 mm.

Set includes:

• Torx screwdriver T5-T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40
• Flat screwdriver 3-3.5-4-5.5-6.5-8 mm
• Phillips screwdriver PH0-PH1-PH2-PH3
• Lever (for panels etc.) 205-305 mm
• 1/4” chuck 4-4.5-5-5.5-6-7-8-9-10-11-12-13 mm
• 1/4” long chuck 4-4.5-5-5.5-6-7-8-9-10-11-12-13 mm
• 1/4” Torx socket E4-E5-E6-E7-E8-E10
• 1/4” long Torx socket E4-E5-E6-E7-E8-E10
• 1/4” Torx socket T6-T7-T8-T9-T10-T15-T20-T25
• 1/4” Torx socket with hole T6H-T7H-T8H-T9H-T10H-T15H-T20H-T25H
• 1/4” hex chuck 3-4-5-5.5-6-7-8 mm
• 1/4” 5-Torx hole chuck 10IPR-15IPR-20IPR-25IPR-27IPR-30IPR-40IPR
• 1/4” Allen key
• 1/4" extension shaft 50-100-150 mm
• 1/4" cardan
• L-hex with ball end long 1.27-1.5-2-2.5-3-4-5-6-8-10 mm
• L-Torx long T10-T15-T20-T25-T27-T30-T40-T45-T50
• 1/4” socket wrench with swivel head 72H
• 1/4” magnetic tip
• 1/4” disk socket wrench 72H
• 1/4” socket wrench with swivel head
• 3/8” chuck 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm
• 3/8” Torx chuck E4-E5-E6-E7-E8-E10-E11-E12-E14
• 3/8” chuck bit 3-4-5-5.5-6-7-8-9-10 mm
• 3/8” Torx chuck T30-T40-T45-T50-T55
• 3/8” Torx chuck with hole T15H-T20H-T25H-T27H-T30H-T40H-T45H-T50H-T55H
• 3/8” socket wrench
• 3/8” spark plug chuck 16-18-21 mm
• 3/8” extension shank 75-150-250 mm
• 3/8” gimbal
• Extension shank adapter to form T-tail 1/2”(F)x3/8”(M)
• 1/2” Torx chuck bit with hole T30H-T40H-T45H-T50H-T55H-T60H-T70H
• 1/2” 12-Torx M5-M6-M8-M9-M10-M12-M14-M16
• 1/2” 12-Torx with hole M16-T
• 1/2” Torx Ribe M8-M9-M10-M11-M12-M13-M1
• 1/2” Torx. long T27-T30-T40-T45-T50-T55-T60-T70
• 1/2” Torx chuck T27-T30-T40-T45-T50-T55-T60-T70
• 1/2” Torx chuck with hole T27H
• 1/2” hex chuck. long 6-7-8-9-10-12-14-17 mm
• 1/2” chuck 8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-32 mm
• 1/2” Torx chuck E10-E11-E12-E14-E16-E18-E20-E22-E24
• 1/2” wrench 45H
• Extension bar adapter for forming a T-tail 3/8”(F)x1/2”(M)
• 1/2” extension bar 125-250 mm
• 1/2” cardan
• 1/2” with swivel head handle 380 mm
• 1/2” hex socket 6-7-8-9-10-12-14-17 mm
• Combination wrench 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32 mm
• Combination wrench 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-24x27-30x32
• Combination wrench with offset 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22
• Tirr flat-ring wrench with reverse 8-9-10-1-12-13-14-15-16-17-18-19 mm
• Socket-socket joint wrench 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm
• Slotted wrench with bend 8x10-11x13-12x14-16x18-17x19-19x22-14x27
• Loop wrench Torx E6xE8-E10xE12-E14xE18-E20xE24
• Measuring tape 5 m
• Pointed-nose pliers 200 mm
• Pointed-nose pliers. bent 195 mm
• Nippers 180 mm
• Cutting pliers 160 mm
• Crown pliers 250 mm
• Locking pliers 230 mm
• Chisel 18x190-24x220 mm
• Locksmiths hammer with wooden handle 400 g
• Square hammer with wooden handle 1000 g
• Telescopic magnetic lifter
• Hand brush 235 mm (steel brush)
• Files flat-triangle-round-semi-round