great selection of tool trolleys from SONIC. The trolley has 8 drawers (1 deep). which can be locked with a key. The height of the trolley is 103 cm, ensuring that you can use the work surface without bending over. The trolleys construction is durable and, thanks to the well-designed side panels, the trolley does not damage the objects around it. A can and paper roll holder is included as an accessory. Rubber-coated wheels Ø 125 mm. two of which are swivel and lockable. Height 1032 mm. Depth 520 mm. width 830 mm.

Set includes:

• Torx screwdriver T5-T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40
• Flat screwdriver 3-3.5-4-5.5-6.5-8 mm
• Phillips screwdriver PH0-PH1-PH2-PH3
• Lever (for panels etc.) 200-300 mm
• 1/4” chuck 4-4.5-5-5.5-6-7-8-9-10-11-12-13 mm
• 1/4” long chuck 4-4.5-5-5.5-6-7-8-9-10-11-12-13 mm
• 1/4” Torx socket E4-E5-E6-E7-E8-E10
• 1/4” long Torx socket E4-E5-E6-E7-E8-E10
• 1/4” Torx socket T6-T7-T8-T9-T10-T15-T20-T25
• 1/4” Torx chuck with hole T6H-T7H-T8H-T9H-T10H-T15H-T20H-T25H
• 1/4” hexagon chuck chuck 3-4-5-5.5-6-7-8 mm
• 1/4” 5-Torx. socket with hole 10IPR-15IPR-20IPR-25IPR-27IPR-30IPR-40IPR
• 1/4” wrench
• 1/4” extension arm 50-100-150 mm
• 1/4” cardan
• L-hexagon with ball end long 1.27-1.5-2-2.5-3-4-5-6-8-10 mm
• L-Torx long T10-T15-T20-T25-T27-T30-T40-T45-T50
• 1/4” wrench with swivel head 72H
• 1/4” magnetic bit
• 1/4” disc wrench 72H
• 1/4” wrench with joint 45H
• 3/8” chuck 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm
• 3/8” Torx chuck E4-E5-E6-E7-E8-E10-E11-E12-E14
• 3/8” chuck bit 3-4-5-5.5-6-7-8-9-10 mm
• 3/8” Torx chuck bit T30-T40-T45-T50-T55
• 3/8” Torx chuck bit with hole T15H-T20H-T25H-T27H-T30H-T40H-T45H-T50H-T55H
• 3/8” socket wrench
• 3/8” spark plug socket 16-18-21 mm
• 3/8” extension shaft 75-150-250 mm
• 3/8” cardan
• 3/8” disc socket wrench 72H
• 3/8” impact socket 8-10-11-12-13-14-15-16-17-19 mm
• 3/8” impact chuck. long 8-10-11-12-13-14-16-17-19 mm
• 3/8” impact extension 75 mm
• 3/8” impact cardan
• 3/8”->1/4” bit adapter
• 3/8” impact reduction adapter 3/8”->1/4”
• 3/8” impact increase adapter 3/8”->1/2”
• Extension bar adapter for T-tail formation 1/2” (F)x3/8” (M)
• 1/2” Torx socket bit with opening T30H-T40H-T45H-T50H-T55H-T60H-T70H
• 1/2” 12-Torx M5-M6-M8-M9-M10-M12-M14-M16
• 1/2” 12-Torx with hole M16-T
• 1/2” Torx-Ribe M8-M9-M10-M10.1-M12-M13-M14
• 1/2” Torx. long T27-T30-T40-T45-T50-T55-T60-T70
• 1/2” Torx chuck T27-T30-T40-T45-T50-T55-T60-T70
• 1/2” Torx chuck with hole T27H
• 1/2” hex chuck. long 6-7-8-9-10-12-14-17 mm
• 1/2” chuck 8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-32 mm
• 1/2” Torx chuck E10-E11-E12-E14-E16-E18-E20-E22-E24
• 1/2” socket wrench 45H
• Extension rod adapter for T-tail formation 3/8” (F)x1/2” (M)
• 1/2” extension rod 125-250 mm
• 1/2” gimbal
• 1/2" handle with swivel head 380 mm
• 1/2” hex chuck 6-7-8-9-10-12-14-17 mm
• 1/2” impact chuck 8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-32 mm
• 1/2” impact chuck. long 10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-28-29-30-32 mm
• 1/2” impact extension 75-125-250 mm
• 1/2” impact reduction adapter 1/2”->3/8”
• 1/2” impact increase adapter 1/2”->3/4”
• 1/2” impact cardan
• Combination wrench 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24 mm
• Tirr combination wrench with reverse 8-9-10-11-12-13-14-15-16-17-18-19 mm
• Cardan chuck 8x9-10x11-12x13-14x15-16x17-18x19 mm
• Mini open-end wrench 10-13-17 mm
• Slot wrench 8x10-11x13-12x14 mm
• Pointed tweezers 200 mm
• Pointed tweezers. bent 195 mm
• Nippers 180 mm
• Cutting pliers 160 mm
• Clamping ring pliers internal-external and straight-bent
• Crown nose pliers 250 mm
• Locking pliers 230 mm
• Chisel 18x190-24x220 mm
• Torque cone 2-3-4 mm
• Torque 3-4-5-6 mm
• Measuring tape 5 m
• Locksmiths hammer with wooden handle 400 g
• Square-edged hammer with wooden handle 1000 g