The KS Tools Performance Plus tool trolley series has been specially developed based on the wishes and needs of repair shops. The trolleys have a strong post & plate construction. to which strong steel sheet walls are attached. base and top plate. Strong bearing wheels with antistatic coating. with brake. Wheel diameter is 125 mm. The corners of the trolley are covered with integrated corner protectors. The drawers have a load capacity of up to 50 kg. The drawer rails are on ball bearings. The paper roll holder is integrated into the side wall of the trolley. The can holder is integrated into the side wall of the trolley. Centrally locked drawers. In addition, the innovative 1-0 drawer individual opening system - if desired, the drawers can only be opened one at a time or not (all can be pulled out if necessary). Drawer internal dimensions 755x398 mm. The foam panels in the drawer make it easy to reach the tools even with work gloves. The height of the P25 version of the trolley is 1024 mm. width 1040 mm and depth 527 mm. The trolley has a load capacity of 600 kg. The top of the trolley is covered with a stainless steel recessed plate.

The set includes:

• 1/4" chuck 4-4.5-5-5.5-6-7-8-9-10-11-12-13 mm
• 1/4" chuck long 4-4.5-5-5.5-6-7-8-9-10-11-12-13 mm
• 1/4" Torx chuck E4-E5-E6-E7-E8-E10
• 1/4" Torx chuck long E4-E5-E6-E7-E8-E10
• 1/4" chuck tip flat 4-5.5-6.5 mm
• 1/4" chuck tip cross PZ0-PZ1-PZ2
• 1/4" chuck tip cross PH0-PH1-PH2
• 1/4" chuck bit hexagon 3-4-5-6-7-8-10 mm
• 1/4" chuck bit Torx T8-T10-T15-T20-T25-T27-T30-T40
• 1/4" chuck bit with Torx hole TH8-TH10-TH15-TH20-TH25-TH27-TH30-TH40
• 1/4" socket bit with 5-Torx opening TS10-TS15-TS20-TS25-TS27-TS30-TS40
• 1/4" bit socket with magnet
• 1/4" extensions 50-100-150 mm
• 1/4" cardan
• 1/4" spinner wrench
• 1/4" SlimPower wrench
• 1/4" 360° rotating head wrench (convertible to T-head if necessary)
• Reduction adapter 3/8"->1/4"
• 3/8" chuck 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm
• 3/8" chuck long 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm
• 3/8" Torx chuck E4-E5-E6-E7-E8-E10-E11-E12-E14-E16
• 3/8" Torx chuck long E4-E5-E6-E7-E8-E10-E11-E12-E14-E16
• 3/8" candle cartridge 16-18-21 mm
• 3/8" spark plug cartridge with gimbal BMW 14 mm
• 3/8" chuck tip cross PH1-PH2-PH3
• 3/8" chuck tip cross PZ1-PZ2-PZ3
• 3/8" chuck tip flat 5.5-6-7 mm
• 3/8" chuck tip hexagon 3-4-5-5.5-6-7-8-9-10-12 mm
• 3/8" chuck bit Torx T8-T10-T15-T20-T25-T27-T30-T40-T45-T50-T55-T60
• 3/8" chuck bit with Torx hole TH8-TH10-TH15-TH20-TH25-TH27-TH30-TH40-TH45-TH50-TH55-TH60
• 3/8" chuck bit 12-point XZN M5-M6-M8-M9-M10-M12
• 3/8" chuck tip Ribe M4-M5-M6-M7-M8-M9-M10-M12
• 3/8->1/2" reduction adapter with T-tail opening
• 3/8" extensions 75-150-250 mm
• 3/8" knurled extension 45 mm
• 3/8" gimbal
• 3/8" universal joint
• 3/8" spinner socket wrench
• 3/8" SlimPower Allen Wrench
• 3/8" T-twist tail extra long
• 1/2" alloy wheel cartridge SlimPower 15-17-19-21-22 mm
• 1/2" chuck 8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm
• 1/2" chuck long 8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm
• 1/2" gimbal tail
• 1/2" torque wrench Ergotorque with viewing window 40-200 Nm
• 1/2" torque wrench Ergotorque 20-100 Nm
• 1/2" extensions 125-250 mm
• 1/2" gimbal
• 1/2" chuck tip hexagon long 5-6-7-8-10-12 mm
• 1/2" chuck bit 12-point long M6-M8-M10-M12-M14
• 1/2" Torx chuck long T40-T45-T50-T55
• 1/2" Torx chuck E10-E11-E12-E14-E16-E18-E20-E24
• 1/2" Torx chuck long E10-E11-E12-E14-E16-E18-E20-E24
• 1/2" long impact chuck 10-12-13-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-32 mm
• 1/2" impact cardan
• 1/2" impact extension 125 mm
• L-hexagon 4 mm
• Pliers ErgoTorque 180 mm
• Cutting pliers ErgoTorque 160 mm
• Pliers ErgoTorque 200 mm
• Pliers. bent ErgoTorque 210 mm
• Locking pliers 240 mm
• Wire end pliers
• Crown nose pliers with locking button 240 mm
• Universal scissors 143 mm
• Locking ring pliers internal-external-straight-bent
• Cutting scissors with interchangeable blade profile (for hoses, pipes, etc.) 5 blades
• Table saw Bi-Metal blade
• Automatic core cutter
• Steel ruler 300 mm
• Measuring tape 5 m
• Caliper 0-150 mm
• Sheet caliper 0.05-1 mm
• Protractor with metal ruler 220 mm
• Telescopic magnetic lifter. with a needle at the other end for cleaning the windshield washer nozzles
• Hacksaw 300 mm
• Painting knife 18 mm wide
• Painting knife 18 mm blades 10 pcs
• Dowel remover 4-5-7.5-9-10 mm
• LED lamp 85 lm
• Flathead screwdriver 3x155-4x155-4x180-5.5x230-6.5x255-8x315 mm
• Phillips screwdriver PH0x155-PH1x205-PH2x230-PH3x265 mm
• Torx screwdriver T4-T5-T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40
• Socket screwdriver 4-5-5.5-6-7-8-9-10-11-12-13 mm
• Flexible duck screwdriver 7 mm
• Hook 90°
• Hook S
• Gasket scraper 2 pcs 25x200 mm
• Bridge lever 11x200-16x300 mm
• Rubber hammer 400 g
• Lock hammer with sharp tip 400 g
• Four-headed hammer 1000 g
• Towers 3-4-5-6 mm
• Cone tower 3-4-5 mm
• Flat chisel 10-10-18 mm
• Scallop 10 mm
• L-hexagon key ball end 1.5-2-2.5-3-4-5-6-8-10 mm
• L-Torx key extra long ball end T10-T15-T20-T25-T27-T30-T40-T45-T50
• L-Torx key extra long ball end T8-T10-T15-T20-T25-T27-T30-T40-T45-T50-T55-T60-T70-T80
• T-hexagon 2-sided 2-2.5-3-4-5-6-7-8 mm
• Files flat-round-square-triangle-crescent
• Double-sided open-end wrench 8x10-11x13-12x14-16x18-17x18-19x22-24x27-30x32 mm
• Combination wrench 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-25x28- 30x32 mm
• Combination wrench 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30x32 mm
• Combination wrench 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-29-30-32 mm
• Loop-loop wrench with offset 6x7-8x9-10x11-12x13-14x15-16x17-18x19-21x23 mm
• Loop-loop wrench with offset 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm
• Short loop-open wrench 8-9-10-11-12-13-14-15-16-17 mm
• C-loop wrench 10x12-11x13-14x17-16x18-19x22 mm
• Torx loop-loop wrench E6xE8-E10xE12-E14xE18-E20xE24
• Straight ring-ring wrench 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm
• Button lock adapter for making a 1/4-3/8-1/2 ring wrench from a ring wrench
• Ring-ring wrench with reverse 8-9-10-11-12-13-14-15-16-17-18-19 mm
• Knurled socket 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm