Key features of the BLOW BVS-549 camera: The camera turns on automatically when reverse gear is engaged Wired infrared reversing camera Designed for trucks, buses and cars Built-in high-quality IR diodes Camera Suitable for any monitor with RCA video input The camera can be rotated vertically. The lens is made with Anti-Fog technology The camera image has intuitive guide lines for easier parking The camera is water and shock resistant – IP67The most important features 7-inch LCD TFT screen with 2 AV inputs: Easy-to-read 7" touch screen The ability to connect two transmitters simultaneously via RCA (Cinch) The advantage of the TFT matrix is very good visibility of objects on the screen even in very bright sunlight The monitor is compatible with any image transmitter with an RCA (Cinch) output The monitor works with intuitive guide lines of reversing cameras The camera image has intuitive guide lines for easier parking Removable from the frameReady to work in all conditionsThe camera parameters ensure good performance of its main tasks, which is to transmit an image behind the vehicle – in particular, the very wide viewing angle and horizontal viewing of the image sensor should be highlighted. Equipped with IR diodes – the camera works well at night. The device has an IP67 waterproof rating, ensuring continuous operation even in rainy conditions. The kit includes the necessary tools for installing the camera wires. Safe reversing and parkingRear parking is often a real challenge, especially in difficult off-road conditions, when visibility is very limited or there is little space in the designated parking space. This task is even more difficult in the case of commercial vehicles. The camera gives every driver an almost complete overview of the space behind the vehicle, and the cameras vertical adjustment allows you to adjust the viewing angle as needed. Widescreen increases ease of useThe 7-inch screen makes the screen easy to read. Thanks to this, the driver can concentrate almost entirely on reversing the vehicle, which in turn increases the comfort and safety of other passengers, as well as other road users. BLOW BVS-549 camera specifications: Image sensor: CMOS7070 Resolution: 658x582 Measurement area: 4.9 x 3.7 Lens: F = 2.5 mm / F = 2.0 Signal system: PAL Horizontal synchronization (kHz): 15625/15734 V-Sync (Hz): 50/60 Automatic gain and backlight control: YES Horizontal resolution: 420 TV lines Minimum illumination: 1.00 lux Signal/noise: < 48.0 [dB] Image sensor viewing angle: 170° Horizontal viewing angle: 120° Vertical viewing angle: 90° Diagonal viewing angle: 165° Waterproof class: IP67 Voltage range: DC 12-24V Video output: 1.0 Vp-p / 75 Ω Operating temperature: -20 ~ +70°C, RH 95% Max Storage temperature: -30 ~ +80°C, RH 95% Max Cable length at the camera: 50 cm Power cord length: 90 cm Video cable length to the monitor: 580 cmSpecification 7" LCD TFT monitor with 2 AV inputs Power supply: 12V / 24V Power consumption: 4.5W Resolution: 840x480 Video format: PAL/NTSC Matrix type: TFT Screen size: 7 16:9 Number of video inputs: 2