LATEST VERSION OF AUTOMATIC CHARGER WITH BATTERY CORRECTION FUNCTIONLCD DISPLAYThe clear LCD display provides the user with all the information about the charging process, including: voltage, current, temperature, battery regeneration status display and operation completion notification.SUMMER AND WINTER MODEWhen the rectifier detects a temperature:Above 28°C - summer mode is activated,Below 10°C - winter mode is activated.Depending on the detected temperature, the corresponding icon lights up on the display and the charger charges the connected vehicle/device optimally.MAIN FEATURES: BATTERY CORRECTION MODE FAST CHARGING 12V AUTOMATIC SUMMER AND WINTER MODECLEAR LCD DISPLAY MODE MODERN MICROPROCESSOR MANY SECURITY SYSTEMS FOR 4Ah TO 100Ah BATTERIES FOR CARS, MOTORCYCLES, BOATS AND OTHER VEHICLES WITH 12V BATTERIESCLEAR LCD DISPLAYClear the display provides the user with all the information, such as: temperature battery charge level expressed in volts charging intensity level expressed in amps information about the full battery charge battery repair mode incorrectly installed connectors (plus mixed up with minus on the battery terminals) the charger does not charge battery level indicator MANY MODES The charger is equipped with a button for switching charging modes, thanks to which you can set your preferred option with one touch: car charging battery charging motorcycle charging battery regeneration mode SAFETY OF USE The charger is equipped with an intelligent chip that cuts off the current in case of unwanted situations that may pose a threat to health and life. The processor protects against: short circuit, overcurrent, overheating, fire, too much voltage, too little voltage, reverse cable connection overcharge protection overvoltage protection induction protection connectors insulated with a thick PVC layer thick wiresSpecification: Dimensions: 158*95*62mm Output cable length: 65 cm Input voltage: AC: 110-220V (50-60Hz) Net weight: 650 g Input cable length: 150 cm Output voltage: 13.8-15.5 V (-15 °C -45 °C automatic voltage compensation) Output current: DC 12V/10A Application range (lead acid battery): 12V 4Ah - 150AhHOW TO CONNECT THE CHARGER CORRECTLY?1. Connect the RED charging clamp to the battery + POSITIVE terminal.2. Connect the BLACK charging clamp DIRECTLY TO THE BATTERY. (Do not attach the clamps to the carburetor, fuel lines, painted or sheet metal body parts)3. Insert the plug into the socket and turn on the charger.