Highly flexible adhesive based on natural rubber. For bonding elements made of rubber, coated materials and rubber derivatives. Creates a strong and flexible layer that is resistant to changing weather conditions. Parameters: Color: light brown Open time: 10 min. Complete cure: 12 h Temperature resistance: -30°C to 70°C Shelf life: 24 months Properties: • flexible • stretchable • resistant to changing weather conditions • does not contain toluene and cyclohexane Use: Rubber adhesive is particularly recommended for repairing elements made of rubber, coated materials and rubber-like materials. Typical applications: • bonding inner tubes • repairing low-pressure rubber hoses • repairing air mattresses Advantages: • for repairing flexible elements • for bonding elements under tension, e.g. inner tubes • for indoor and outdoor use; maintains its strength parameters• safe to useUsage:Connecting elements:1. The glued surfaces must be clean of any dirt (dust, water, grease, etc.). Degrease metal surfaces using the P-102 cleaning kit or P-959 technical degreaser.2.Apply glue to both surfaces and spread it evenly.3. Wait for the solvents to evaporate (approximately 10 minutes at 18 °C).4.Press the glued elements firmly together and let them dry completely.Sealing cracks/holes:1. Cut a suitable patch from the supplied rubber (the size and shape should be chosen so that it covers the surface to be repaired with at least one centimeter of margin).2. Clean the joined surfaces with sandpaper and degrease thoroughly using the P-102 cleaning kit or P-959 technical degreaser. 3. Apply the adhesive to both surfaces and spread it evenly. 4. Wait for the solvents to evaporate (approximately 10 minutes at 18°C). 5. Press the glued elements firmly together and allow to dry completely.