Suitable for bonding various materials: metal, metal alloys, glass, plastic (except PP, PE, PTFE), stone, concrete, porcelain, wood, hard rubber and their combinations. The work can be carried out at temperatures from +5°C to +25°C. The product is used in repair work where it is necessary to achieve a colorless, invisible joint/filling or where the repair time should be completed in a few minutes. The product is used for bonding jewelry (e.g. combining amber with gold or silver) and for emergency repairs in the household. It is also used for bonding and fixing electronic components, protecting them from moisture, dust, dirt and other contaminants.

Usage:
1. For best results, the components to be glued must be clean, dry and free of grease. 
2. Open the glue nozzle, holding the product vertically. 
3. Press the plunger, then squeeze the required amount of glue components from the syringe onto the plastic tray and mix thoroughly until a uniform, light yellow color is achieved. 
4. Apply the prepared mixture to the surface to be glued. 
5. Press the surfaces together firmly and remain motionless until the glue hardens. Clean the nozzle of excess glue and place the nozzle back on the needle.
Working time: the mixed glue must be used within 1 minute.
The curing time of the glue can be shortened by heating the area to be repaired with a warm stream of air (e.g. with a hair dryer)
Colour: transparent
Initial curing: 8 minutes (at +20°C)
Full curing: 12 hours
Temperature resistance: -30°C to +80°C