Colorless epoxy adhesive with a fast drying time - 10 minutes. Reliable and effective: for permanent bonding of glass, porcelain, ceramics, all plastics (except PP, PE, PTFE), stone, concrete, marble, metals and their alloys, hard rubber and wood. Also bonds combinations of these materials. Ideal for: jewelry (e.g. bonding amber to gold or silver); -bonding electronic components; -household emergency repairs; -automotive repairs (e.g. sealing fuel tanks and coolers).

Usage:
For best results, the components to be bonded must be clean and dry.
1. Roughen the surfaces by filing or sanding.
2. Remove all particles from the surfaces and degrease the surfaces (e.g. using a degreaser).
3. Mix the resin (A) and hardener (B) thoroughly in the correct ratio (1:1).
4. Apply the prepared mixture to one of the surfaces.
5. Press the elements to be glued firmly and hold them in place until the adhesive has completely cured.
Working time: The mixed adhesive must be used within 3 minutes
The curing time of the adhesive can be shortened by heating the area to be repaired with a warm stream of air (e.g. with a hair dryer).
Colour:  transparent
Initial curing: 10 minutes (at +20°C)
Complete curing: 24 hours
Temperature resistance: -30°C to +80°C
Store at +5°C to +25°C