Fast-setting two-component adhesive for all materials used in the household, garage and workshop. Ideal for smaller assembly and repair work. Bonds: stone, marble, bricks, concrete, rigid plastic, metal, wood, glass, etc. (except PE, PP, PTFE plastic). Withstands water, temperatures and aggressive chemicals. Once the product has dried, it can be painted, drilled, sanded, threaded or filed.

Usage:
For best results, the components to be bonded must be clean and dry.
1. Roughen the surfaces by filing or sanding. 
2. Remove all particles from the surfaces and degrease the surfaces (e.g. using a degreaser).
3. Mix the resin (A) and hardener (B) thoroughly in the correct ratio (1:1).
4. Apply the prepared mixture to one of the surfaces.
5. Press the elements to be glued firmly and hold them in place until the adhesive has completely cured.
Working time: The mixed adhesive must be used within 2 minutes.
The curing time of the adhesive can be shortened by heating the area to be repaired with a warm stream of air (e.g. with a hair dryer).
Colour: beige
Initial curing: 5 minutes (at +20°C)
Complete curing: 12 hours
Temperature resistance: -30°C to +80°C
Store at +5°C to +25°C