Ready-to-use assembly adhesive based on synthetic rubber additives. The product replaces the use of nails and screws in many applications. High initial grip for immediate bonding. Can be applied to vertical surfaces (does not flow). Primarily for use on non-absorbent materials - glass, ceramics, metal, plastic. Bonds natural stone, building ceramics, concrete, wood, OSB board, chipboard, plasterboard, etc.

Usage:
The surfaces to be bonded must be clean, dust and grease free.
1. Apply the adhesive in the form of dots or stripes to the surface to be bonded.
2. Join the elements together, press them against each other; then separate the elements and wait 10 seconds (at a temperature of 18°C).
3. Reconnect the elements, press them together and allow to dry completely (at least 12 hours).
Colour: light brown
The opened adhesive must be used immediately and the surfaces fixed within 5 minutes
Complete drying: 12 hours
Temperature resistance: -30°C to +60°C
Store at a temperature of +5°C to +25°C in a well-ventilated room.