For use in precision repairs on metal parts damaged by rust or cracking. The so-called "liquid metal". Also bonds stone, glass, wood, most plastics (except PE, PP, PTFE and silicone rubber). Excellent for joining material combinations, e.g. concrete - iron, hard rubber - cast iron. Protects against corrosion. Resistant to mechanical stress, liquids, chemical compounds. The content of metal fillers in the adhesive ensures high thermal conductivity and reduces joint expansion. 

Usage:
1. Roughen the surfaces by filing or grinding. 
2. Remove all particles from the surfaces and degrease the surfaces (e.g. using a degreaser).
3. Mix the resin (A) and hardener (B) thoroughly in the correct ratio (1:1).
4. Apply the prepared mixture to one of the surfaces.
5. Press the elements to be glued firmly and hold them in place until the adhesive has completely cured.
Colour: grey
Possibility: mixed adhesive must be used within 30 minutes.
Initial curing: 135 minutes (at 20°C).
Full curing: 24 hours.
Temperature resistance: -30°C to +90°C
Store at +5°C to +25°C. Protect from moisture.