Two-component adhesive for bonding various materials: PVC, plastic (except PP, PE, PTFE), wood, metal (including alloys), porcelain, stone, concrete, glass, marble, etc. For covering electronic elements - the adhesive fills cracks and does not shrink. Especially effective for bonding heavy, uneven surfaces. The glued area is resistant to temperature, water, oil, gasoline. The two-chamber nozzle facilitates precise and easy dosing of ingredients. After drying, the adhesive can be applied and processed.

 

Usage:

1. The surfaces to be bonded must be clean (e.g. use sandpaper), thoroughly remove oil and grease.

2. Squeeze the required amount of glue and hardener from the syringe and mix thoroughly until a uniform, creamy color is achieved (this determines the effectiveness of the result).

3. Apply the prepared mixture to the surface to be bonded, if necessary, press the surfaces to be bonded firmly together.

4. After bonding, keep the joined surfaces motionless, if necessary fixed under pressure until the adhesive dries.

Colour: beige

Position time after mixing: 60 minutes

Initial curing: 240 minutes (at +25°C)

Full curing: 48 hours

Temperature resistance: -30°C to +90°C