>

Two-component epoxy mass is specially developed for repairing leaking water systems, sewage systems, central heating systems, etc. Can be used on large surfaces. Rebuilds materials such as metal, glass, wood, stone, plastic. It is also possible to use the product as a filler to fill damaged areas. It is not possible to rebuild polypropylene and polyethylene with the product. After complete drying, it is resistant to water, oil, diluted acids, solvents and chemicals. 

Usage:
The surfaces to be mixed must be clean (e.g. use sandpaper), oil and dirt free.
1. Warm components A and B to room temperature before mixing.
2. Take equal amounts of components Ad and Bd and mix/flow them between hands until the color tone is uniform. Use the product within 10 minutes of mixing. Do not mix components A and B in larger quantities than you can use within 10 minutes.
3. Apply the epoxy to the surfaces to be joined or repaired and allow the surfaces to stand still for at least 45 minutes. After approximately 12 hours, the joints/repairs can be mechanically worked.
The repair time can be shortened by heating the bonded area with a hot air gun. Surfaces that are difficult to bond should be pre-coated with a thin layer of liquid epoxy adhesive (e.g. E-358) and left to dry.
Colour: blue
Temperature resistance: -40°C to +100°C
Initial curing: 45 minutes
Full curing: 12 hours
Store at a temperature of +5°C to +20°C. Protect from moisture.