Two-component epoxy compound. Bonds and levels almost all materials: wood, glass, ceramics, plastic, metal, stone. For widespread use in households, car workshops and industrial enterprises. After hardening, chemically resistant to water, oil, gasoline, diluted acids. Prevents corrosion of metal elements and is a very good electrical insulator.

Usage:
The surfaces to be bonded must be clean (e.g. use sandpaper), free of oil and dirt.
1. Warm components A and B to room temperature before mixing.
2. Take equal amounts of components Ad and Bd and mix/flow them between hands until the mixture is almost uniform. Use the product within 5 minutes of mixing. Do not mix more components A and B than can be used within 5 minutes.
3. Apply the epoxy to the surfaces to be joined or repaired and let the surfaces stand still for at least 45 minutes. After approximately 12 hours, the joints/repairs can be mechanically joined.
The repair time can be shortened by heating the bonded area with a hot air gun. Surfaces that are difficult to bond should be coated with a thin layer of liquid epoxy adhesive (e.g. E-358) and left to dry.
Colour: grey
Temperature resistance: -40°C to +100°C
Initial curing: 10 - 30 minutes, depending on temperature and layer thickness
Full curing: 12 hours
Store at a temperature of +5°C to +20°C. Protect from moisture.