Professional two-component epoxy adhesive for bonding all types of surfaces, especially plastic. The innovative composition of the adhesive ensures the quality and durability of the joints. K2 Plastipox plastic adhesive joints remain as strong as if they were welded together. Suitable for bonding the following materials: plastic. wood. metal. stainless steel. glass. ceramics. porcelain. fiberglass. PVC. ABS. leather. wood, etc. Can be successfully used as an adhesive for automotive plastics. Two-component plastic adhesive K2 Plastipox has high impact resistance and is resistant to water. gasoline. kerosene and oil. Perfectly fills cavities up to 10 mm thick. The adhesive begins to solidify after 7 minutes. The glued object can be moved for 15 minutes. After 2 hours, the joint has reached 75% of its strength and after 24 hours it is completely hardened. Color - milky. At lower temperatures, the drying time may be longer. The fully bonded joint withstands temperatures from -55°C to +120°C. The compressive strength of the joint is up to 305 kg/cm2. The innovative syringe applicator of K2 Plastipox ensures easy use and optimal dosing of both components at the same time. The sealed syringe protects the product from drying out. Thanks to this, the adhesive retains its properties long after opening and does not allow it to dry out. The product is not suitable for bonding plastics made of PE polyethylene and PP polypropylene. If you are looking for a strong plastic adhesive. plastic welding adhesive or automotive plastic adhesive. then you have found it. K2 Plastipox connects surfaces permanently.