For use in bonding all types of synthetic plastic materials (vacuum cleaners, mixers, refrigerators, coffee makers, hair dryers, computers, telephones, plastic toys, headlight lenses, car dashboards, telephone holders, reflectors, etc.). Not suitable for bonding PE, PP, PTFE plastics. Aggressive adhesive that partially dissolves the surfaces to be bonded. Thanks to this, the adhesive forms very strong joints (similar to welding). In addition, the resulting joints are resistant to hot water and chemicals.

Usage:
1. Clean the surfaces from dust, dirt and grease. Roughen the surfaces to be bonded using sandpaper.
2. Apply a thin layer of adhesive to both surfaces to be bonded (in the case of porous materials, apply the adhesive twice).
3. Let dry for about 1 minute to allow the solvents to evaporate.
4. Press the surfaces to be bonded together firmly and fix for 12 hours.
Temperature resistant: -30°C to +80°C
Complete curing: 12 hours    
Store in a dry and well-ventilated room at a temperature of +5°C to +25°C. Protect from moisture.