Technicqll instant glue, gel is a thixotropic, fast-setting glue that is particularly suitable for bonding vertical surfaces and porous materials. For use on metals, plastics (except PP, PE, PTFE), elastomers, ceramics and wood.

Usage:
For best results, the parts to be glued must be dry, clean and grease-free.
1. Apply the glue sparingly to the surface to be glued (usually one drop is enough).
2. Quickly place the components together and make sure they are aligned correctly.
3. Apply sufficient pressure - so that the adhesive layer becomes as thin as possible.
4. Do not move or align the parts until the final cure has been achieved - usually within a few seconds.
Excess glue can be removed using the product "Technicqll P-093 - Quick Glue Remover".

Viscosity: gel
Max. gap to be filled: 0.25 mm
Temperature resistance: -55°C to +80°C
Store at: +5°C to +25°C