Free Shipping Worldwide
Safe and secure delivery.
PICHLER
1/4" trelliotsiku 150 mm pikkune painduv saba. Otsikupea ..
77.55€ Ex Tax: 62.54€
1/4" trelliotsiku 150 mm pikkune painduv saba. Otsikupea lukustiga. Saab kasutada lihvotsikute ja harjade käitamiseks...
77.55€
Ex Tax: 62.54€
A basic set of spray adapters. used when working with an ..
959.40€ Ex Tax: 773.71€
A basic set of spray adapters. used when working with an 8 kg slide hammer or hydraulic puller. The set also includes tools. needed when disassembling electronic or mechanical components during spray work...
959.40€
Ex Tax: 773.71€
Set of special long 12-point sockets with magnet and ball..
75.59€ Ex Tax: 60.96€
Set of special long 12-point sockets with magnet and ball end. Allows you to work in hard-to-reach places. The ball end allows you to turn at an angle. A strong magnet holds the bolt in place. Can also be installed from top to bottom in a narrow place. Where the bolt cannot otherwise be installed. T..
75.59€
Ex Tax: 60.96€
Set of special long TORX bits with magnet and ball end. A..
75.59€ Ex Tax: 60.96€
Set of special long TORX bits with magnet and ball end. Allows you to work in hard-to-reach places. The ball end allows you to turn at an angle. A strong magnet holds the bolt in place. It is possible to install the bolt from top to bottom in a narrow place. where the bolt cannot otherwise be instal..
75.59€
Ex Tax: 60.96€
Set of special long hex bits with magnet and ball end. Al..
75.59€ Ex Tax: 60.96€
Set of special long hex bits with magnet and ball end. Allows you to work in hard-to-reach places. The ball end allows you to turn at an angle. A strong magnet holds the bolt in place. It is possible to install the bolt from top to bottom in a narrow place. where the bolt cannot otherwise be install..
75.59€
Ex Tax: 60.96€
Transition adapter. used to connect the slide hammer to v..
95.33€ Ex Tax: 76.88€
Transition adapter. used to connect the slide hammer to various fixtures (for example, set 26330T). 1-1/2 "16G -> M 18x1.50. Special steel...
95.33€
Ex Tax: 76.88€
Pull adapter with M17x1 thread...
69.29€ Ex Tax: 55.88€
Pull adapter with M17x1 thread...
69.29€
Ex Tax: 55.88€
Adapter for removing BOSCH injectors. M17x1. For kits 306..
87.78€ Ex Tax: 70.79€
Adapter for removing BOSCH injectors. M17x1. For kits 30639T. 30754T. Pichler code 60385314...
87.78€
Ex Tax: 70.79€
Thanks to the strong simultaneous internal and external g..
195.46€ Ex Tax: 157.63€
Thanks to the strong simultaneous internal and external grip of the adapters in the set on the surface and inside of the nozzle, the nozzle is easy to pull out. The middle adapter adjusts the internal and external grip to the same plane. All adapters have a hexagonal profile on the outside. The adap..
195.46€
Ex Tax: 157.63€
The kit is only intended for removing glow plugs with M8x..
1,391.95€ Ex Tax: 1,122.54€
The kit is only intended for removing glow plugs with M8x1 threads. The kit can be used in areas with good accessibility, if special guiding tools are not required. Fits Fiat Ducato. Peugeot Boxer. Citröen Jumper 2.2 and 3.0 l engines...
1,391.95€
Ex Tax: 1,122.54€
The kit is only intended for removing M10x1 glow plugs. T..
694.87€ Ex Tax: 560.38€
The kit is only intended for removing M10x1 glow plugs. The kit is used in areas with good accessibility. in cases. where special guiding tools are not required. The kit also includes a special guide tool. which is suitable for Mercedes Sprinter and Ford Transit...
694.87€
Ex Tax: 560.38€
Collar adapter M16 for kit 28400T and 28401T...
84.17€ Ex Tax: 67.88€
Collar adapter M16 for kit 28400T and 28401T...
84.17€
Ex Tax: 67.88€
Intermediate tool for press frame 24774T. Used for replac..
381.15€ Ex Tax: 307.38€
Intermediate tool for press frame 24774T. Used for replacing silent blocks and axle bushings...
381.15€
Ex Tax: 307.38€
Ø 3x14 mm spare pins. used for Denso injector work...
11.83€ Ex Tax: 9.54€
Ø 3x14 mm spare pins. used for Denso injector work...
11.83€
Ex Tax: 9.54€
Pull adapter with thread M20x1 (Denso)...
75.74€ Ex Tax: 61.08€
Pull adapter with thread M20x1 (Denso)...
75.74€
Ex Tax: 61.08€
Special adapter for 3-pin Denso injectors...
115.89€ Ex Tax: 93.46€
Special adapter for 3-pin Denso injectors...
115.89€
Ex Tax: 93.46€
3-piece set for removing Denso injectors with a slide ham..
432.19€ Ex Tax: 348.54€
3-piece set for removing Denso injectors with a slide hammer or Pichler universal hydraulic tool. The angle of the fuel hose to the injector determines which adapter to use. Contains: (90384870 / 2) extraction adapter Ø 16 mm/connection angle 28.5°. (90384880 / 2) special nut M12x1.5. (90384875) ext..
432.19€
Ex Tax: 348.54€
Slightly tapered bore sleeves for centering the electrode..
14.21€ Ex Tax: 11.46€
Slightly tapered bore sleeves for centering the electrode drilling. In case the electrode breaks flush with the cover and body. Saves time and drills...
14.21€
Ex Tax: 11.46€
Slightly conical hole sleeves for centering the electrode..
14.21€ Ex Tax: 11.46€
Slightly conical hole sleeves for centering the electrode drilling. In case the electrode breaks flush with the cover and body. Saves time and drills. Ø 3.5 mm. For M10 set...
14.21€
Ex Tax: 11.46€
Slightly conical hole sleeves for centering the electrode..
15.45€ Ex Tax: 12.46€
Slightly conical hole sleeves for centering the electrode drilling. In case. if the electrode breaks flush with the cover and body. Saves time and drills. Ø 4.2 mm. for M12 set...
15.45€
Ex Tax: 12.46€
Slightly conical hole sleeves for centering the electrode..
14.21€ Ex Tax: 11.46€
Slightly conical hole sleeves for centering the electrode drilling. In case. if the electrode breaks flush with the lid and body. Saves time and drills. Ø 2.7 mm. for M8 set...
14.21€
Ex Tax: 11.46€
