Proxima PX87 is a keyless chuck pneumatic drill for tire work. max 2500 rpm. The tool with a strong aluminum body is lightweight. weighing 0.89 kg and ergonomically designed. For safety, the tool trigger has a locking mechanism. to protect against accidental activation. The chuck type allows for quick. without a key. attachment of accessories with a 2-13 mm shank.
Max operating pressure 6.3 bar. Min. internal diameter of the compressed air hose 10 mm!
The inlet air must be clean. The productivity is sufficient and must not exceed the max. operating pressure - overpressure and unclean air shorten the products service life due to excessive wear and can be dangerous. causing damage and/or injuries. It is recommended to clean the air inlet filter at least 1x a week. In case of a line longer than 8m, it may be necessary to increase the pressure. to compensate for pressure losses.
It is recommended to use a filter-regulator-lubricator - this keeps the tool in good condition and extends its service life. It is very important. that the tool is properly oiled - without lubrication the tool will not work properly and will wear out faster. If a filter/regulator/lubricator is not installed in the air system. air-operated tools should be lubricated at least once a day or after 2 hours of operation with 2–6 drops of oil. depending on the working environment. through the air inlet.

Technical information:

• Quick-release chuck 2-13 mm
• Revolutions per minute 2500
• Working pressure 6.3 bar
• Air consumption 170 l/min
• Weight 0.89 kg
• Length 220 mm
• Air inlet 1/4" (quick-release coupling included)