Single-phase "2 in 1" two-in-one wire welding device. With wheels. for easier transportation. "NO GAS" and "GAS" can be welded with gas and without gas. Ideal for use in repair and maintenance work when welding steel and aluminum. Torch with EURO interface. Low current consumption - 16 A. Suitable for 1 kg (100 mm) and 5 kg (200 mm) wire spools. MIG/MAG gas welding (wire 0.6-0.8-1.0 mm) indoors. NO GAS filler wire (0.9-1.2 mm) welding outdoors. 40 W special motor with wire feed mechanism developed by GYS. With cooling fan. which protects against overheating. The ventilation system ensures. that the device electronics are protected from dust and dirt. Very easy to use and understandable SMART control panel for setting parameters. 4-step adjustment. In addition, the wire speed. The user only needs to select the type/diameter of the wire and the thickness of the material being welded from the panel. The device sets the rest itself.

Technical information:

• "NO GAS" flux cored wire welding. flux cored wire 0.9-1.2 mm
• MIG/MAG gas welding. wire 0.6-0.8-1.0 mm
• Spool 1 kg diameter 100 mm. 5 kg diameter 200 mm
• Torch with EURO interface
• Special motor with GYS-feed wire feed mechanism
• Suitable for steel and aluminum
• Voltage 230 V
• No-load voltage 25.5-40 V
  
• Welding current 30-160 A
• Load capacity EN60974-1 (40°C) 115 A and 20%
• Ideal for indoor and outdoor use
• SMART parameter adjustment
• MIG torch gun 2.2 m
• Ground cable
• Weight 25 kg
• Can be used with a generator min 4.5 kW