touch-sensitive buttons standard and start/stop batteries automatic switching when the engine starts LED charge level display small and ergonomic, thickness 23mm included crocodiles and screw-down mountings waterproof..
 & # x20AC; & # x153; Polarity Check: To protect the charger from incorrectly connected wires (+/-), the charger is equipped with a fuse that will blow if the wires are connected in the wrong direction. The fuse is located in the drawer on the chargers power cord and should be replaced with a new a..
 & # x20AC; & # x153; Polarity Check: To protect the charger from incorrectly connected wires (+/-), the charger is equipped with a fuse that will blow if the wires are connected in the wrong direction. The fuse is located in the drawer on the chargers power cord and should be replaced with a new a..
Compact charger for gel and acid batteries. It allows charging elements with a voltage of 12V and a capacity of 7Ah - 30Ah. Power supply 230V. Small 12V car and motorcycle batteries (acid batteries with a capacity of 7-30Ah and gel batteries with a capacity of 15-30Ah) Designed for charging 15Ah bat..
touch-sensitive buttons standard and start/stop batteries led charge level display small and ergonomic, thickness 23mm included crocodiles and screw-down mountings waterproof..
The tester is designed for the battery. to test the condition of charging and starting the car. The car battery uses starting current to determine testing. DIN. IEC. EN. CA. MCA. Measures voltage between 7 V and 15 V. The device has a digital display and LEDs...
Battery terminal set. special alloy. which ensures a good connection to the battery terminal and does not oxidize. Sleeve-bolt with cable connection...
Battery terminal set. Simple pressure locking system. which also covers the battery terminal with a plastic cover. We recommend using batteries. which often stand still and it would be wise to disconnect the battery terminals...
Continuously checks the battery charge. Beeps every 10 seconds if the battery charge drops below 12.2 volts. Easy to install. Ideal for vehicles that are rarely used. ..
The battery tester can be used to test batteries with a starting current of up to 1000 A. The maximum test current is 500 A. The condition of the charging system and the starting circuit can also be checked using a tester...
Designed for max 105 Ah car batteries. In addition to the battery load test function, you can also check the condition of the generator charging. Numeral scale with colored sections for better traceability...
Suitable for most modern battery types (standard battery. AGM. Ca. gel. MF. VRLA, etc.). With the help of the tester, you can easily and reliably check the condition of the battery. charging and starting system condition. The whole test is done automatically. the result is displayed on the LED scree..
Classic memory saver with OBD II interface or "memory saver". Used in cases. when you need to change the car battery. to preserve the "memory" of car and car radio and other electronic devices. supplying them with electricity when the battery is removed. A cable with lugs for taking power from anoth..