Special set for bonding parts made of polyethylene (PE), polypropylene (PP) and Teflon (PTFE). Also suitable for bonding easily bonded materials (metal, aluminum, rubber, hard plastics, wood, ceramics, concrete, glass, plywood, PVC, etc.). Bonds hard and flexible materials. 
The set includes an adhesive activator (Activator) and a colorless, waterproof adhesive (Adhesive).

Usage: 
The surfaces to be bonded must be roughened with sandpaper, clean, dust and grease free.
1. Apply a thin layer of Activator only to PP, PE or PTFE surfaces. The Activator should not be applied to materials that are easy to glue (e.g. metal, PVC, rubber).
3. Wait 2-3 minutes after applying the Activator layer. If necessary, it is possible to apply 2-3 layers of Activator to the surface with an interval of 1 minute. After applying the last layer, wait 2-3 minutes.
4. Apply a thin layer of Glue to only one surface to be glued. The less Glue you apply to the surface, the stronger the bond.
5. Quickly join the elements to be glued together and make sure they are aligned correctly.
6. Press firmly on the elements to be bonded, compress them together and do not move or realign them until the initial crosslinking is achieved (usually takes a few seconds).
Max. gap to be filled: 0.25 mm
Temperature resistance: -55°C to +80°C
Store at +5°C to +20°C