KS Tools

TRUCK BALL JOINT DRIVER 58X80X100MM KS TOOLS

Universal ball joint opener. suitable for Scania. Volvo. ..

161.60€ Ex Tax: 132.46€

TRUCK BALL JOINT DRIVER 58X80X100MM KS TOOLS

Universal ball joint opener. suitable for Scania. Volvo. Man. DAF. MB etc. The joint legs are made of a square profile. which ensures greater load capacity and reduces deflection. Made specifically for opening truck joints. Maximum torsional strength 280 Nm. The power screw is with a ball. impact re..

161.60€ Ex Tax: 132.46€

TRUCK BALL JOINT OPENER 10T. FOR 27-36MMX90MM CONE KS TOOLS

Universal. Also suitable for SUVs. vans and trucks. Speci..

209.28€ Ex Tax: 171.54€

TRUCK BALL JOINT OPENER 10T. FOR 27-36MMX90MM CONE KS TOOLS

Universal. Also suitable for SUVs. vans and trucks. Special steel. Max force 10 t. Fork groove 36 mm. Reach 90 mm. Power spindle G1/2"x14gx110...

209.28€ Ex Tax: 171.54€

TRUCK FILTER WRENCH 104-150MM OIL. AIR. FUEL KS TOOLS

Infinitely adjustable with self-tightening effect. Specia..

296.31€ Ex Tax: 242.88€

TRUCK FILTER WRENCH 104-150MM OIL. AIR. FUEL KS TOOLS

Infinitely adjustable with self-tightening effect. Special automatic left and right turning mechanism allows for loosening and tightening of various sized oil filters. Toothed grips on the left for better retention when loosening. Forged...

296.31€ Ex Tax: 242.88€

TRUCK STOPPER 1PC RUBBER 200X150X100MM KS TOOLS

Wheel chocks with carrying handle for trucks. buses. trai..

24.45€ Ex Tax: 20.04€

TRUCK STOPPER 1PC RUBBER 200X150X100MM KS TOOLS

Wheel chocks with carrying handle for trucks. buses. trailers. agricultural machinery, etc. Made of rubber - does not rust. does not rattle. does not deform. excellent slip resistance. Solid rubber. 1 pc per pack. Dimensions 200x150x100 mm...

24.45€ Ex Tax: 20.04€

TURBO REMOVAL/INSTALLATION WRENCH MAN. 15MM KS TOOLS

With 2-component handle. Bent ring wrench is ideal for ti..

48.24€ Ex Tax: 39.54€

TURBO REMOVAL/INSTALLATION WRENCH MAN. 15MM KS TOOLS

With 2-component handle. Bent ring wrench is ideal for tightening and loosening turbocharger mounting nuts on MAN trucks. 12-point profile. Wrench length 266 mm...

48.24€ Ex Tax: 39.54€

UNIV. HOSE CLAMP PLIERS 18-36MM (WAFER) L=175MM KS TOOLS

Spring-type hose clamp opening pliers. For hose clamps wi..

76.91€ Ex Tax: 63.04€

UNIV. HOSE CLAMP PLIERS 18-36MM (WAFER) L=175MM KS TOOLS

Spring-type hose clamp opening pliers. For hose clamps with a diameter of 18-36 mm. Total length 175 mm...

76.91€ Ex Tax: 63.04€

UNIV. HOSE CLAMP PLIERS 18-54MM (WAFER) L=230MM KS TOOLS

Spring-type hose clamp opening pliers. For hose clamps wi..

96.13€ Ex Tax: 78.79€

UNIV. HOSE CLAMP PLIERS 18-54MM (WAFER) L=230MM KS TOOLS

Spring-type hose clamp opening pliers. For hose clamps with a diameter of 18-54 mm. Total length 230 mm...

96.13€ Ex Tax: 78.79€

UNIVERSAL ADAPTER. ADJUSTABLE WITH 3 PINS FOR 150.2295

..

88.81€ Ex Tax: 72.79€

UNIVERSAL ADAPTER. ADJUSTABLE WITH 3 PINS FOR 150.2295

..

88.81€ Ex Tax: 72.79€

UNIVERSAL FLYWHEEL LOCKING KIT KS TOOLS

For blocking the flywheel when the gearbox is removed. Re..

82.30€ Ex Tax: 67.46€

UNIVERSAL FLYWHEEL LOCKING KIT KS TOOLS

For blocking the flywheel when the gearbox is removed. Required when removing and installing flywheels. Clutch pressure plates and pulleys. Widely adjustable axially and radially...

82.30€ Ex Tax: 67.46€

UNIVERSAL SCREWDRIVER CROSS 6IN1. 125MM CROSS PH/PZ 1-3 KS TOOLS

ERGOTORQUEplus screwdriver. Universally usable for PH and..

14.08€ Ex Tax: 11.54€

UNIVERSAL SCREWDRIVER CROSS 6IN1. 125MM CROSS PH/PZ 1-3 KS TOOLS

ERGOTORQUEplus screwdriver. Universally usable for PH and PZ heads. DIN 5265. Two-component non-slip handle. Optimal force transmission. Hanging hole. Hardened blade. Polished surface finish. Chrome vanadium steel...

14.08€ Ex Tax: 11.54€

V-BELT ALIGNMENT KIT KS TOOLS

..

78.33€ Ex Tax: 64.21€

V-BELT ALIGNMENT KIT KS TOOLS

..

78.33€ Ex Tax: 64.21€

V-PROFILE PULLEY HOLDER KS TOOLS

V-profile for belt-driven coolant pumps. generators. pump..

40.72€ Ex Tax: 33.38€

V-PROFILE PULLEY HOLDER KS TOOLS

V-profile for belt-driven coolant pumps. generators. pump drive pulleys. fans, etc. Suitable for pulleys with a diameter of 50-200 mm. Overall length 360 mm...

40.72€ Ex Tax: 33.38€

VAG 2.5 TDI PULLEY HOLDING WRENCH. 32MM. 175MM KS TOOLS

For professional engine repair. Open 12-point. For tighte..

15.10€ Ex Tax: 12.38€

VAG 2.5 TDI PULLEY HOLDING WRENCH. 32MM. 175MM KS TOOLS

For professional engine repair. Open 12-point. For tightening and loosening the automatic timing belt tensioner. With plastic-coated handle. With hanging hole. Special steel. Very good fit. Areas of application: Audi 100. A4. A6 TDI 5-cylinder engines. Volkswagen Polo/Lupo from year of manufacture 1..

15.10€ Ex Tax: 12.38€

VAG OIL CAP WRENCH. WITH HOLE. XZN M16. 1/2" KS TOOLS

XZN® M16 bit with center hole. Special socket for turning..

16.83€ Ex Tax: 13.79€

VAG OIL CAP WRENCH. WITH HOLE. XZN M16. 1/2" KS TOOLS

XZN® M16 bit with center hole. Special socket for turning the gearbox oil drain plug. Fits: Audi A3. A4. A6. Volkswagen Golf IV. LT etc...

16.83€ Ex Tax: 13.79€

VALVE OIL SEAL ASSEMBLY PLIERS (PROTECTED JAWS) KS TOOLS

Used to remove valve stem seals in engines with hydraulic..

55.26€ Ex Tax: 45.29€

VALVE OIL SEAL ASSEMBLY PLIERS (PROTECTED JAWS) KS TOOLS

Used to remove valve stem seals in engines with hydraulic tappets. where there is a risk of damaging the tappet housing seat. Total length of pliers 275 mm. of which the working part is 100 mm...

55.26€ Ex Tax: 45.29€

VALVE PULLER FOR TL VALVE (VALVE PULLER) 330MM METAL KS TOOLS

Classic valve retractor. Made of metal. The part that com..

13.17€ Ex Tax: 10.79€

VALVE PULLER FOR TL VALVE (VALVE PULLER) 330MM METAL KS TOOLS

Classic valve retractor. Made of metal. The part that comes into contact with the rim is plastic coated to prevent damage to the paint surface...

13.17€ Ex Tax: 10.79€

VDE CABLE CUTTER KNIFE. STRAIGHT BLADE 210MM KS TOOLS

VDE certified knife for electrical work. IEC60900. Handle..

23.23€ Ex Tax: 19.04€

VDE CABLE CUTTER KNIFE. STRAIGHT BLADE 210MM KS TOOLS

VDE certified knife for electrical work. IEC60900. Handle made of special plastic. Total length 210 mm. Blade length 50 mm...

23.23€ Ex Tax: 19.04€

VICES SPARE PACKS FOR 914.0008

..

131.81€ Ex Tax: 108.04€

VICES SPARE PACKS FOR 914.0008

..

131.81€ Ex Tax: 108.04€

VICES WITH PIPE HOLDER. ROTARY BASE 125MM KS TOOLS

Table vises on a swivel base. With pipe holding jaws unde..

493.13€ Ex Tax: 404.21€

VICES WITH PIPE HOLDER. ROTARY BASE 125MM KS TOOLS

Table vises on a swivel base. With pipe holding jaws under the holding packs. With impact anvil. Covered spindle screw. Strong sliding surface with I-profile. Quick opening thanks to the trapezoidal thread of the spindle. Powder coated. Made of special steel. Induction-hardened jaws. For professiona..

493.13€ Ex Tax: 404.21€

VICES WITH PIPE HOLDER. ROTARY BASE 150MM KS TOOLS

Table vises on a swivel base. With pipe holding jaws unde..

694.74€ Ex Tax: 569.46€

VICES WITH PIPE HOLDER. ROTARY BASE 150MM KS TOOLS

Table vises on a swivel base. With pipe holding jaws under the holding packs. With impact anvil. Covered spindle screw. Strong sliding surface with I-profile. Quick opening thanks to the trapezoidal thread of the spindle. Powder coated. Made of special steel. Induction-hardened jaws. For professiona..

694.74€ Ex Tax: 569.46€