Free Shipping Worldwide
Safe and secure delivery.
LASER TOOLS
For use in separating the vibration damper from the crank..
21.71€ Ex Tax: 17.79€
For use in separating the vibration damper from the crankshaft gear.Suitable for: Volkswagen Transporter T6 (from 2017).Engine: 4-cylinder CRD 2.0L.Similar to OEM T50071.Required for damage-free removal of the internal thread vibration damper.Thread size: M22 x 1.5 mm...
21.71€
Ex Tax: 17.79€
Used to remove the high pressure fuel pump on 1.4, 1.6 an..
92.77€ Ex Tax: 76.04€
Used to remove the high pressure fuel pump on 1.4, 1.6 and 2.0 l TDi engines.Fits: Volkswagen Golf (from 2013), Audi A3 (from 2013), Skoda Rapid (from 2012), Octavia (from 2013), Fabia 2014, Superb (from 2015), Kodiaq 2016 and Seat Alhambra (from 2011), Ibiza 2008), Leon (2013) and Ateca.Similar to ..
92.77€
Ex Tax: 76.04€
Special diesel injection pump plunger for BMW, Land Rover and Opel vehicles with 2.5 TD engines.Suitable for: BMW E34, E36, E38; Land Rover; Vauxhall, Opel; 2.5 TD engines.Similar to original equipment 13-5-120, LRT12-119, KM 825...
33.91€
Ex Tax: 27.79€
90° elbow fitting, suitable for 6mm plastic pipe or 7.5mm..
16.83€ Ex Tax: 13.79€
90° elbow fitting, suitable for 6mm plastic pipe or 7.5mm rubber hose. Continuous working pressure: 5 bar (72 psi); Maximum pressure: 7 bar (101 psi). Working temperature: -40°C to 120°C. Housing made of nylon PA12; O-ring made of FKM (viton). Manufactured according to SAE J2044-2009 standards. Grey..
16.83€
Ex Tax: 13.79€
90° elbow fitting, suitable for 8mm plastic pipe or 7.5mm..
17.54€ Ex Tax: 14.38€
90° elbow fitting, suitable for 8mm plastic pipe or 7.5mm rubber hose. Continuous working pressure: 5 bar (72 psi); Maximum pressure: 7 bar (101 psi). Working temperature: -40°C to 120°C. Housing made of nylon PA12; O-ring made of FKM seal (viton). Manufactured according to SAE J2044-2009 standards...
17.54€
Ex Tax: 14.38€
90° elbow fitting, suitable for 8mm plastic pipe or 7.5mm..
19.77€ Ex Tax: 16.21€
90° elbow fitting, suitable for 8mm plastic pipe or 7.5mm rubber hose. Continuous working pressure: 5 bar (72 psi); Maximum pressure: 7 bar (101 psi). Working temperature: -40°C to 120°C. Housing made of nylon PA12; O-ring made of FKM seal (viton). Manufactured according to SAE J2044-2009 standards...
19.77€
Ex Tax: 16.21€
For connection to 6mm plastic pipe or 7.5mm rubber hose. ..
8.18€ Ex Tax: 6.71€
For connection to 6mm plastic pipe or 7.5mm rubber hose. Material - nylon PA12. Maximum working pressure 5 bar. Pack of 5 For installation use S183-6933..
8.18€
Ex Tax: 6.71€
For connection to 8mm plastic pipe or 7.5mm rubber hose. ..
9.51€ Ex Tax: 7.79€
For connection to 8mm plastic pipe or 7.5mm rubber hose. Material - nylon PA12. Maximum working pressure 5 bar. Pack of 5 For installation use S183-6933..
9.51€
Ex Tax: 7.79€
Quick-adjust serrated bullnose jaws provide a secure grip..
33.40€ Ex Tax: 27.38€
Quick-adjust serrated bullnose jaws provide a secure grip on even the most awkward fasteners. 1/2" square drive and square bore allow for use with power arms, ratchets and extensions. Easy pull-back action provides a quick and secure grip on any size fastener from 14mm to 32mm. Made from chrome vana..
33.40€
Ex Tax: 27.38€
Quick-adjust serrated bullnose jaws provide a secure grip..
26.59€ Ex Tax: 21.79€
Quick-adjust serrated bullnose jaws provide a secure grip on even the most awkward fasteners. 1/2" square drive and square bore allow for use with power arms, ratchets and extensions. Easy pull-back action provides a quick and secure grip on any size fastener from 8mm to 17mm. Made from chrome vanad..
26.59€
Ex Tax: 21.79€
Multiple applications in cars and commercial vehicles.For..
10.52€ Ex Tax: 8.63€
Multiple applications in cars and commercial vehicles.For removing and tightening plastic drain plugs to avoid the risk of injury by applying force as originally intended by the manufacturer.Produced with both 17mm hex and 3/8 square drive.For use with 3/8 ratchet and extension for harder to reach p..
10.52€
Ex Tax: 8.63€
Suitable for BMW, Chrysler, Ford, Land Rover, Mercedes-Be..
9.81€ Ex Tax: 8.04€
Suitable for BMW, Chrysler, Ford, Land Rover, Mercedes-Benz, Opel.Designed for removing and tightening short plastic coolant drain plugs.Groove width: 14 mm x 2.5 mm thick with curved edges to prevent damage.Made with 3/8 drive for use with a ratchet and 17 mm hex key for use...
9.81€
Ex Tax: 8.04€
Rain and light sensor removal tools, suitable for 90% of ..
19.77€ Ex Tax: 16.21€
Rain and light sensor removal tools, suitable for 90% of vehicles on the market.Three different sizes, internal dimensions: 57 x 32 mm, 63 x 42 mm and 68 x 58 mm.Simply remove the windscreen and heat the windscreen from the outside with a heat gun.Remove the adhesive with the tool of your choice, us..
19.77€
Ex Tax: 16.21€
72 tooth mechanism.Handle length: 255 mm.Quick release fu..
36.45€ Ex Tax: 29.88€
72 tooth mechanism.Handle length: 255 mm.Quick release function.Made of composite material, making the ratchet lightweight and easy to use.A tooth mechanism repair kit is available separately, see Laser part number S183-3606...
36.45€
Ex Tax: 29.88€
See rehviremondikomplekt sobib ideaalselt nii maantee- ku..
12.15€ Ex Tax: 9.96€
See rehviremondikomplekt sobib ideaalselt nii maantee- kui ka maastikuratturitele ning on piisavalt kompaktne tee- ja rajaäärsete remonditööde jaoks ning piisavalt tugev töökojas kasutamiseks.Kangidel on lai ja ümar profiil, mis muudab nende käes hoidmise mugavaks ja annab neile tugevuse, mis on vaj..
12.15€
Ex Tax: 9.96€
Two angled handles to access hard-to-reach adjustment scr..
39.50€ Ex Tax: 32.38€
Two angled handles to access hard-to-reach adjustment screws.Easily adjust the rear axle without removing the plastic covers.Includes 2 interchangeable bits M10 and M12.Made of chrome vanadium...
39.50€
Ex Tax: 32.38€
Rear axle bushing tool set Suitable for vehicles: Ford Mo..
515.81€ Ex Tax: 422.79€
Rear axle bushing tool set Suitable for vehicles: Ford Mondeo IV 2007-2015, Galaxy 2006-2015, S-Max 2006-2013, Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 Equivalent to OEM 205-1017 Allows you to replace the rear axle bushings under the vehicle. Made in England - Sheffield. ..
515.81€
Ex Tax: 422.79€
