PICHLER

A basic set of spray adapters. used when working with an ..

928.67€ Ex Tax: 761.21€

A basic set of spray adapters. used when working with an 8 kg slide hammer or hydraulic puller. The set also includes tools. needed when disassembling electronic or mechanical components during spray work...

928.67€ Ex Tax: 761.21€

6-PCS. 3/8" LONG (123MM) 12-SPEED SOCKETS. M4-M10. BALL END. MAGNET TRIUMF

Set of special long 12-point sockets with magnet and ball..

69.59€ Ex Tax: 57.04€

6-PCS. 3/8" LONG (123MM) 12-SPEED SOCKETS. M4-M10. BALL END. MAGNET TRIUMF

Set of special long 12-point sockets with magnet and ball end. Allows you to work in hard-to-reach places. The ball end allows you to turn at an angle. A strong magnet holds the bolt in place. Can also be installed from top to bottom in a narrow place. Where the bolt cannot otherwise be installed. T..

69.59€ Ex Tax: 57.04€

7-PCS. 3/8" LONG (123MM) TORX SOCKETS. T20-T45. BALL END. MAGNET TRIUMF

Set of special long TORX bits with magnet and ball end. A..

69.59€ Ex Tax: 57.04€

7-PCS. 3/8" LONG (123MM) TORX SOCKETS. T20-T45. BALL END. MAGNET TRIUMF

Set of special long TORX bits with magnet and ball end. Allows you to work in hard-to-reach places. The ball end allows you to turn at an angle. A strong magnet holds the bolt in place. It is possible to install the bolt from top to bottom in a narrow place. where the bolt cannot otherwise be instal..

69.59€ Ex Tax: 57.04€

7-PIECE. 3/8" LONG (123MM) HEX SOCKETS. 3-10MM. BALL END. MAGNET TRIUMF

Set of special long hex bits with magnet and ball end. Al..

69.59€ Ex Tax: 57.04€

7-PIECE. 3/8" LONG (123MM) HEX SOCKETS. 3-10MM. BALL END. MAGNET TRIUMF

Set of special long hex bits with magnet and ball end. Allows you to work in hard-to-reach places. The ball end allows you to turn at an angle. A strong magnet holds the bolt in place. It is possible to install the bolt from top to bottom in a narrow place. where the bolt cannot otherwise be install..

69.59€ Ex Tax: 57.04€

ADAPTER DELPHI. BOSCH PIEZO INJECTORS M14X1.5/M18X1.5 PICHLER

..

67.56€ Ex Tax: 55.38€

ADAPTER DELPHI. BOSCH PIEZO INJECTORS M14X1.5/M18X1.5 PICHLER

..

67.56€ Ex Tax: 55.38€

ADAPTER FOR HUB / DRIVE SHAFT MOUNT 27835T FOR CONNECTING SLIDE HAMMER M18X1.5 PICHLER

Transition adapter. used to connect the slide hammer to v..

92.26€ Ex Tax: 75.63€

ADAPTER FOR HUB / DRIVE SHAFT MOUNT 27835T FOR CONNECTING SLIDE HAMMER M18X1.5 PICHLER

Transition adapter. used to connect the slide hammer to various fixtures (for example, set 26330T). 1-1/2 "16G -> M 18x1.50. Special steel...

92.26€ Ex Tax: 75.63€

BOSCH INJECTOR ADAPTER M17X1 -> M18X1.5 PICHLER

Pull adapter with M17x1 thread...

67.05€ Ex Tax: 54.96€

BOSCH INJECTOR ADAPTER M17X1 -> M18X1.5 PICHLER

Pull adapter with M17x1 thread...

67.05€ Ex Tax: 54.96€

BOSCH INJECTOR ADAPTER M17X1 -> M20X1.5 PICHLER

Adapter for removing BOSCH injectors. M17x1. For kits 306..

85.04€ Ex Tax: 69.71€

BOSCH INJECTOR ADAPTER M17X1 -> M20X1.5 PICHLER

Adapter for removing BOSCH injectors. M17x1. For kits 30639T. 30754T. Pichler code 60385314...

85.04€ Ex Tax: 69.71€

BOSCH INJECTOR REINFORCED 3-PIECE ADAPTER 60384417 PICHLER

Thanks to the strong simultaneous internal and external g..

189.25€ Ex Tax: 155.13€

BOSCH INJECTOR REINFORCED 3-PIECE ADAPTER 60384417 PICHLER

Thanks to the strong simultaneous internal and external grip of the adapters in the set on the surface and inside of the nozzle, the nozzle is easy to pull out. The middle adapter adjusts the internal and external grip to the same plane. All adapters have a hexagonal profile on the outside. The adap..

189.25€ Ex Tax: 155.13€

BROKEN GLOW PLUG REMOVAL KIT M8X1 PICHLER

The kit is only intended for removing glow plugs with M8x..

1,347.44€ Ex Tax: 1,104.46€

BROKEN GLOW PLUG REMOVAL KIT M8X1 PICHLER

The kit is only intended for removing glow plugs with M8x1 threads. The kit can be used in areas with good accessibility, if special guiding tools are not required. Fits Fiat Ducato. Peugeot Boxer. Citröen Jumper 2.2 and 3.0 l engines...

1,347.44€ Ex Tax: 1,104.46€

BROKEN GLOW PLUG REMOVAL. COMP. M10X1. 6041740 PICHLER

The kit is only intended for removing M10x1 glow plugs. T..

672.68€ Ex Tax: 551.38€

BROKEN GLOW PLUG REMOVAL. COMP. M10X1. 6041740 PICHLER

The kit is only intended for removing M10x1 glow plugs. The kit is used in areas with good accessibility. in cases. where special guiding tools are not required. The kit also includes a special guide tool. which is suitable for Mercedes Sprinter and Ford Transit...

672.68€ Ex Tax: 551.38€

COLLAR LONG NUT M16X2 SET 28400 AND 28401 M9R PICHLER

Collar adapter M16 for kit 28400T and 28401T...

81.49€ Ex Tax: 66.79€

COLLAR LONG NUT M16X2 SET 28400 AND 28401 M9R PICHLER

Collar adapter M16 for kit 28400T and 28401T...

81.49€ Ex Tax: 66.79€

CYLINDER 22724T CONNECTION TO FRAME 24774T PICHLER

Intermediate tool for press frame 24774T. Used for replac..

368.90€ Ex Tax: 302.38€

CYLINDER 22724T CONNECTION TO FRAME 24774T PICHLER

Intermediate tool for press frame 24774T. Used for replacing silent blocks and axle bushings...

368.90€ Ex Tax: 302.38€

DENSO 3-PIN KEY 4509T SPARE PINS 3PCS PICHLER

Ø 3x14 mm spare pins. used for Denso injector work...

11.44€ Ex Tax: 9.38€

DENSO 3-PIN KEY 4509T SPARE PINS 3PCS PICHLER

Ø 3x14 mm spare pins. used for Denso injector work...

11.44€ Ex Tax: 9.38€

DENSO INJECTOR ADAPTER M20X1 PICHLER

Pull adapter with thread M20x1 (Denso)...

73.35€ Ex Tax: 60.13€

DENSO INJECTOR ADAPTER M20X1 PICHLER

Pull adapter with thread M20x1 (Denso)...

73.35€ Ex Tax: 60.13€

DENSO INJECTOR OPENING KEY 3-PIN PICHLER

Special adapter for 3-pin Denso injectors...

112.19€ Ex Tax: 91.96€

DENSO INJECTOR OPENING KEY 3-PIN PICHLER

Special adapter for 3-pin Denso injectors...

112.19€ Ex Tax: 91.96€

DENSO INJECTOR PULLER M18X1.5 FOR SLIDING HAMMER 90384865 PICHLER

3-piece set for removing Denso injectors with a slide ham..

418.41€ Ex Tax: 342.96€

DENSO INJECTOR PULLER M18X1.5 FOR SLIDING HAMMER 90384865 PICHLER

3-piece set for removing Denso injectors with a slide hammer or Pichler universal hydraulic tool. The angle of the fuel hose to the injector determines which adapter to use. Contains: (90384870 / 2) extraction adapter Ø 16 mm/connection angle 28.5°. (90384880 / 2) special nut M12x1.5. (90384875) ext..

418.41€ Ex Tax: 342.96€

DRILLING CENTERING SLEEVE M10 2.6MM PICHLER

Slightly tapered bore sleeves for centering the electrode..

13.78€ Ex Tax: 11.29€

DRILLING CENTERING SLEEVE M10 2.6MM PICHLER

Slightly tapered bore sleeves for centering the electrode drilling. In case the electrode breaks flush with the cover and body. Saves time and drills...

13.78€ Ex Tax: 11.29€

DRILLING CENTERING SLEEVE M10 3.0MM PICHLER

..

9.61€ Ex Tax: 7.88€

DRILLING CENTERING SLEEVE M10 3.0MM PICHLER

..

9.61€ Ex Tax: 7.88€

DRILLING CENTERING SLEEVE M10 3.5MM PICHLER

Slightly conical hole sleeves for centering the electrode..

13.78€ Ex Tax: 11.29€

DRILLING CENTERING SLEEVE M10 3.5MM PICHLER

Slightly conical hole sleeves for centering the electrode drilling. In case the electrode breaks flush with the cover and body. Saves time and drills. Ø 3.5 mm. For M10 set...

13.78€ Ex Tax: 11.29€

DRILLING CENTERING SLEEVE M12 4.2MM PICHLER

Slightly conical hole sleeves for centering the electrode..

14.89€ Ex Tax: 12.21€

DRILLING CENTERING SLEEVE M12 4.2MM PICHLER

Slightly conical hole sleeves for centering the electrode drilling. In case. if the electrode breaks flush with the cover and body. Saves time and drills. Ø 4.2 mm. for M12 set...

14.89€ Ex Tax: 12.21€

DRILLING CENTERING SLEEVE M8 2.7MM PICHLER 6041641

Slightly conical hole sleeves for centering the electrode..

13.78€ Ex Tax: 11.29€

DRILLING CENTERING SLEEVE M8 2.7MM PICHLER 6041641

Slightly conical hole sleeves for centering the electrode drilling. In case. if the electrode breaks flush with the lid and body. Saves time and drills. Ø 2.7 mm. for M8 set...

13.78€ Ex Tax: 11.29€