PICHLER

In case. if repair kit 26644 was not successful due to very worn and damaged thread. it is necessary to use this kit to make a new thread in the upper part of the threaded hole. The kit includes a milling cutter. spare thread sleeves and an installation tool...

117.48€ Ex Tax: 96.29€

INJECTOR REMOVAL TOOL CHRYSLER CRD PICHLER

JEEP Cheeroke/Chrysler Voyager 2.5/2.8 CRD...

435.29€ Ex Tax: 356.79€

INJECTOR REMOVAL TOOL CHRYSLER CRD PICHLER

JEEP Cheeroke/Chrysler Voyager 2.5/2.8 CRD...

435.29€ Ex Tax: 356.79€

M10 AND M12 SET OF DRAWING SPINDLE WITHOUT TIP 6041748 PICHLER

M16 x 1.5 mm...

162.72€ Ex Tax: 133.38€

M10 AND M12 SET OF DRAWING SPINDLE WITHOUT TIP 6041748 PICHLER

M16 x 1.5 mm...

162.72€ Ex Tax: 133.38€

M10 AND M12 SET SCREWDRIVER BEARING SUPPORT WASHER PICHLER

Support washer. For 26364T set. Diameter 16 mm...

47.73€ Ex Tax: 39.13€

M10 AND M12 SET SCREWDRIVER BEARING SUPPORT WASHER PICHLER

Support washer. For 26364T set. Diameter 16 mm...

47.73€ Ex Tax: 39.13€

M10 COMPLETE SCREWDRIVER SPARE THREAD BIT M8 506041746 PICHLER

Suitable for both Pichler sets with puller and impact ham..

35.74€ Ex Tax: 29.29€

M10 COMPLETE SCREWDRIVER SPARE THREAD BIT M8 506041746 PICHLER

Suitable for both Pichler sets with puller and impact hammer. Thread size UNF 12". Suitable for M8...

35.74€ Ex Tax: 29.29€

M10 NORM. REPLACEMENT CUTTER FOR DRILLING (9.0X5.4X4.0) PICHLER

Pichler spare cutter M10x1 from the glow plug base remova..

276.99€ Ex Tax: 227.04€

M10 NORM. REPLACEMENT CUTTER FOR DRILLING (9.0X5.4X4.0) PICHLER

Pichler spare cutter M10x1 from the glow plug base removal kit. Newer. model with shorter tip and thread at the back. Pichler code 60417355...

276.99€ Ex Tax: 227.04€

M10 SHORT CUTTER HOLDER ARM PICHLER

M10 milling cutter holder adapter. For 26216T kit...

102.63€ Ex Tax: 84.13€

M10 SHORT CUTTER HOLDER ARM PICHLER

M10 milling cutter holder adapter. For 26216T kit...

102.63€ Ex Tax: 84.13€

M10 SHORT DRILLING BEARING (9.0X48.7) PICHLER

M10 glow plug drill bit for engines where the long bit ca..

169.94€ Ex Tax: 139.29€

M10 SHORT DRILLING BEARING (9.0X48.7) PICHLER

M10 glow plug drill bit for engines where the long bit can damage the cylinder head. For example VW 1.9 TDI Pichler 60418758.Only fits M10 short bit holder 27491T...

169.94€ Ex Tax: 139.29€

M10 SPEC. FROM KIT26656 SPARE PULL SPINDLE PICHLER

UNF 1/4 " draw spindle. M8x180mm...

63.39€ Ex Tax: 51.96€

M10 SPEC. FROM KIT26656 SPARE PULL SPINDLE PICHLER

UNF 1/4 " draw spindle. M8x180mm...

63.39€ Ex Tax: 51.96€

M10 STANDARD. REPLACEMENT CUTTER FOR BORE-OUT Broach, THIN AND LONG HOLDING ARM PICHLER

Used in cases where access to the spark plug is very deep..

67.66€ Ex Tax: 55.46€

M10 STANDARD. REPLACEMENT CUTTER FOR BORE-OUT Broach, THIN AND LONG HOLDING ARM PICHLER

Used in cases where access to the spark plug is very deep in the block cover or where it is necessary to drill very deep. Fits the newer type of M10 cutter 26658T...

67.66€ Ex Tax: 55.46€

M10 THREAD REINFRINGER PICHLER

Thread restoration sleeve installation tool M10x1...

12.96€ Ex Tax: 10.63€

M10 THREAD REINFRINGER PICHLER

Thread restoration sleeve installation tool M10x1...

12.96€ Ex Tax: 10.63€

M10X1 GLOW PLUG DRILLING SET 1/4 UNF THREAD DRILL PICHLER

Thread size UNF 1/4". suitable for M10 glow plug removal ..

31.77€ Ex Tax: 26.04€

M10X1 GLOW PLUG DRILLING SET 1/4 UNF THREAD DRILL PICHLER

Thread size UNF 1/4". suitable for M10 glow plug removal kit..

31.77€ Ex Tax: 26.04€

M10X1-M12X1 GLOW PLUG MILLING-THREAD RE-DRILL PICHLER

The cutter with a special profile allows you to easily. g..

38.38€ Ex Tax: 31.46€

M10X1-M12X1 GLOW PLUG MILLING-THREAD RE-DRILL PICHLER

The cutter with a special profile allows you to easily. guided by the damaged original thread and self-centering. in one operation. cut a new thread. The tip of the cutter has a hexagonal profile. allowing you to use a chuck when turning...

38.38€ Ex Tax: 31.46€

M10X1.25-M12X1.25 GLOW PLUG MILLING-THREAD RE-DRILL PICHLER

The cutter with a special profile allows you to easily. g..

38.48€ Ex Tax: 31.54€

M10X1.25-M12X1.25 GLOW PLUG MILLING-THREAD RE-DRILL PICHLER

The cutter with a special profile allows you to easily. guided by the damaged original thread and self-centering. in one operation. cut a new thread. The tip of the cutter has a hexagonal profile. allowing you to use a chuck when turning...

38.48€ Ex Tax: 31.54€