Free Shipping Worldwide
Safe and secure delivery.
TRIUMF
Adapter for chucks and bits 1/4” hex -> 1/4" chuck shank...
2.19€ Ex Tax: 1.79€
Adapter for chucks and bits 1/4” hex -> 1/4" chuck shank. For drills. for screwdrivers...
2.19€
Ex Tax: 1.79€
Adapter for chucks and bits 1/4” hex -> 3/8" chuck shank...
2.49€ Ex Tax: 2.04€
Adapter for chucks and bits 1/4” hex -> 3/8" chuck shank. For drills. for screwdrivers...
2.49€
Ex Tax: 2.04€
General purpose triangular file with medium serration (No..
6.96€ Ex Tax: 5.71€
General purpose triangular file with medium serration (No. 2). Suitable for filing flat surfaces, grooves and corners. With composite handle. Grip width 15 mm. length 250 mm...
6.96€
Ex Tax: 5.71€
The set includes five different shaped grinding bits for ..
4.32€ Ex Tax: 3.54€
The set includes five different shaped grinding bits for the drill. The mounting pin diameter is 6 mm.The set includes:Abrasive grinding bits - round bit - conical bit - cylindrical bit (2 pcs) - ball bit..
4.32€
Ex Tax: 3.54€
Cardan handle for turning bits. 1/4" socket wrench (male)..
14.49€ Ex Tax: 11.88€
Cardan handle for turning bits. 1/4" socket wrench (male) on one end and a drill bit wrench on the other end. Made of CrV special steel. Matt surface treatment...
14.49€
Ex Tax: 11.88€
Nylon fiber disc retaining pin...
10.93€ Ex Tax: 8.96€
Nylon fiber disc retaining pin...
10.93€
Ex Tax: 8.96€
Triumph tool trolley spare rail...
16.22€ Ex Tax: 13.29€
Triumph tool trolley spare rail...
16.22€
Ex Tax: 13.29€
Silicone gun made of aluminum. For standard tubes...
27.50€ Ex Tax: 22.54€
Silicone gun made of aluminum. For standard tubes...
27.50€
Ex Tax: 22.54€
Universal tool for turning or fixing a pulley. Grips the ..
121.44€ Ex Tax: 99.54€
Universal tool for turning or fixing a pulley. Grips the wheel with two pins. Includes four pairs of pins of different sizes: 6-10. 8-11. 10-12. 11-16 mm. Adjustable according to the wheel diameter. Large power arm. Rubber-coated handle...
121.44€
Ex Tax: 99.54€
The ruler can be used to determine the size of an angle i..
63.69€ Ex Tax: 52.21€
The ruler can be used to determine the size of an angle in degrees. Length 350 mm...
63.69€
Ex Tax: 52.21€
Adjustable height universal headphones for low and high frequency noise. The insulation surface is made of soft leather. which seals according to the shape of the head. CE marked...
9.40€
Ex Tax: 7.71€
The bicycle cross is made of CrV special steel. Foldable ..
42.04€ Ex Tax: 34.46€
The bicycle cross is made of CrV special steel. Foldable and compact. Cross section made of hexagonal profile. 17x19x21x1/2”...
42.04€
Ex Tax: 34.46€
A pneumatically driven indicator determines top dead cent..
105.17€ Ex Tax: 86.21€
A pneumatically driven indicator determines top dead center on a gasoline engine...
105.17€
Ex Tax: 86.21€
Used to remove the bearing in hard-to-reach places and when the shaft cannot be removed for replacement. The support part with adjustable distance and angle is supported on the surface of the outer housing and rotated, the thin puller plate removes the bearing from the seat...
40.51€
Ex Tax: 33.21€
Used to extract larger diameter or stronger rings for sealing rings and o-rings...
23.23€
Ex Tax: 19.04€
Used for removing and installing cardan, final drive and ..
33.09€ Ex Tax: 27.13€
Used for removing and installing cardan, final drive and gearbox retaining rings. Non-slip PU coated handle. Straight tip...
33.09€
Ex Tax: 27.13€
Suitable for unscrewing and tightening (not recommended)...
27.20€ Ex Tax: 22.29€
Suitable for unscrewing and tightening (not recommended). Can be tightened with a 3/8" adapter or a 19 mm wrench. Made of steel. With knurled grips...
27.20€
Ex Tax: 22.29€
The lever can be used to position the bridge parts. Adjus..
196.78€ Ex Tax: 161.29€
The lever can be used to position the bridge parts. Adjustable hook. Tubular handle 1000 mm long...
196.78€
Ex Tax: 161.29€
Wheel hub stud bolt (also wheel bolts) thread restoration..
73.25€ Ex Tax: 60.04€
Wheel hub stud bolt (also wheel bolts) thread restoration kit. The kit includes three basic sizes: M12x1.25. M12x1.50 and M14x1.50. The thread cutters have a special tooth profile. which can restore damaged or worn threads. Thanks to the special 1/2” head chuck, the cutter can be turned with either ..
73.25€
Ex Tax: 60.04€
For use in truck axle half-axle repair work with a capaci..
20.49€ Ex Tax: 16.79€
For use in truck axle half-axle repair work with a capacity of 3 l. when removing the half-axle from the axle...
20.49€
Ex Tax: 16.79€
Very high performance. durable model. Also suitable for t..
119.20€ Ex Tax: 97.71€
Very high performance. durable model. Also suitable for trucks. vans. buses, etc. Jaw diameter 46 mm. height 100 mm. Comes with 3 different power screws with lengths 25-32-47 mm...
119.20€
Ex Tax: 97.71€