zemez899
Your shopping cart is empty!
Two-component epoxy compound. Available for making repairs to mechanical devices without disassembling them. Smooths out unevenness, compacts and compacts almost all materials. The product can be used to repair: corroded pumps, leaking cooling devices and tanks, various new solutions (electrical fuses), bundles of electrical wires, housings and handles, broken headlights, armature, bumper, undercarriage details, etc. The substance can be used with various materials such as metal (aluminum, steel, cast iron), plastic (PVC, plexiglass), glass, wood, stone, etc. Üends are resistant to vibration, temperatures and chemicals. The product protects metal elements from corrosion and is a good electrical insulator. Hardening can be done mechanically.
Usage:
  ;
1. Warm the components of Time B to room temperature before mixing.
2. Pour equal amounts of component Ad and Bd and mix/flow them between your hands until the mixture is melted. Use the product within 5 minutes of mixing. Be sure to mix the components of Aja B in a larger amount than you can use within 5 minutes.
3. Apply the epoxy mass to the surfaces to be repaired or repaired and let the surfaces stand still for at least 45 minutes. After about 12 hours, the replacements/repairs can be done mechanically.
The repair time can be reduced by heating the glued area with hot water. Hard-to-glue surfaces should be pre-coated with a thin layer of liquid epoxy glue (e.g. E-358) and allowed to dry.
Color: orange
Resistant to temperatures: -40°C to +100°C
Initial curing: 45 minutes (at 25°C)
Full curing: 12 hours
Silt at temperature: +5ºC to +20ºC. Protect from moisture.