Quick-heating polystyrene glue for gluing plastic (except PP, PE, PTFE) elements. The product creates colored joints with the same strength as the materials to be glued. Fills small gaps, so the elements to be glued do not have to fit perfectly. After hardening, the glued surface can be sanded.

Usage:
The surfaces to be glued must be clean, free of dust and grease.
1. Apply a thin layer of glue evenly to the light surface.
2. Übring the elements together, press them lightly and hold for 15 seconds. Let dry.
3. After a few minutes, the components are pre-assembled.
4. Allow to dry for 12 hours, until the glue is completely hardened.
Color: colorless
Open glue must be used and surfaces must be fixed within a maximum of 5 minutes
Time to reach tensile strength: 10 minutes (+20°C)
Full curing: 12 hours
Resistant to temperatures: -30ºC to +60ºC
Sealed at temperature: +5ºC to + 25ºC