Quality glue that permanently bonds glass to metal. The product is resistant to UV radiation, moisture, temperature and most chemicals. The brush included in the set ensures great surface coverage and is ideal for large surfaces and hard-to-reach areas. To attach the rearview mirror, use the shock and vibration-absorbing rubber pad included in the kit.

Usage:
For best results, the surfaces to be repaired must be clean, grease-free and dry.
1 . Mark exactly the position of the mirror leg/holder to be installed on the window glass (it is not recommended to correct it during installation).
2. Remove the mirror from the holder/mirror base.
3. Apply the glue to the metal surface of the intended mirror holder for gluing. The adhesive layer must be smooth and as thin as possible.
4. Place the degreased rubber pad on a smooth horizontal surface, e.g. table and press the mirror holder against it; hold the pressed elements with equal force for 10 seconds.
5. Cut the excess part of the rubber to match the size of the support surface of the mirror holder.
6. Apply a second, thin and thin layer of glue with a brush to the rubber pad attached to the side of the holder.
7. Press the mirror holder with a firm movement, without shifting and with equal force, on the car window glass, keeping it under pressure and in place for 20-30 seconds.
8. Let the holder stand for at least 1 hour, then attach the mirror to the side of the mirror holder.
Glue drops can be removed using Technicqll Quick Glue Remover (P-093)
Viscosity: 80 cP
Max. workable gap: 0.10 mm
Temperature resistant: -55°C to +80°C
Apply at temperature: +5ºC to +20ºC