zemez899
Your shopping cart is empty!
low-viscosity anoacrylic adhesive designed for gluing closely fitting/fastening parts made of rubber, glass, metal, ceramics and plastic (except PP, PE, PTFE). The product has a fast gluing time.
Usage:
To achieve the best result, the surfaces to be glued must be clean and dry.
1. Apply the glue to the surface you want to seal.
2. Üfasten the surfaces together and check that the surfaces are in place.
3. Place the surfaces to be glued under pressure, so that the glue covers the entire surface to be glued evenly.
4. During the few seconds that the adhesive is working, the bonded surfaces should not be moved or attempted to be bonded again.
Glue residues can be removed using Technicqll Instant Adhesive Remover (P-093)
Viscosity: 40 - 60 cP
Max. workable gap: 0.10 mm
Temperature resistant: -55°C to +80°C
Apply at temperature: +5ºC to +20ºC