Easy-to-form and easy-to-apply fiberglass putty for larger and deeper repairs of plastic and sheet metal. Rust holes. for the repair and sealing of fiberglass hulls and boat hulls. Also suitable for repairing smaller plastic cracks. The fiberglass in the mass increases the strength. Waterproof. Technical information: Two-component fiberglass puttyBlue-green colorTemperature resistance up to + 160 ° CCuring time approx. 10 min. sandable after 10 minutesTensile strength 100 kg / cm²Resistant to water. saline solutions. organic solvents. dilute acids. Alkali Shelf life two years at temperatures below + 20 ° C. * Curing times are valid at + 23 ° C. The best results are obtained in dry conditions at temperatures above + 15 ° C. It hardens faster at higher temperatures. slower at low temperatures. NB! As the product contains fiberglass, never sand it without using a protective mask!