Cylinder filled with butane gas 230g (net weight), with internal thread 7/16

This gas cylinder is suitable for devices working with direct butane gas with a threaded connection 7/16 . Gas appliances must comply with standard EN 521:2019. Follow the instruction manual included with the gas device.

Replacing the gas cylinder: Change the gas cylinder in a well-ventilated area without sources of ignition. Make sure the gas cylinder is empty (by shaking the cylinder). Close the gas valve/valve/regulator of the gas appliance. Remove the gas cylinder from the device by turning the device counterclockwise. Replace the oil seal if the seal is damaged or missing. Remove the plastic protective cap on top of the new gas cylinder. Place the new gas cylinder in a stable, upright position. Turn the device continuously, using only hand power, until the device is completely connected to the gas valve on the gas cylinder. Do not use excessive force. Avoid damaging the thread.